Vinyl Decal Sticker: CCTV Camera Recording
In car cameras are one of the best ways to protect your vehicle from vandalism, accidents, or break-ins. If you do not have a budget to buy the camera - buy our Vehicle Window Security Warning Decal Sticker. The result would be the same!!!
Self adhesive. Will not harm your paint or natural finish. Can be applied and reapplied for desired look. Water proof and stain resistant Indoor life of over 8 years. Outdoor life of over 5 years UV protected. Can also be used with a heat gun or household blow drier for shaping. Very flexible and stretchable. Super thin (0.2mm) to fit in most tight spots or corners. Can be used for other projects other than automotive. Super easy to use.
Instructions:
1) Rub the sticker to be sure the transfer tape is properly attached to the sticker.
2) Clean and dry the chosen area.
3) Remove the wax backing slowly making sure the sticker stays attached to the transparent transfer tape.
4) Carefully place the sticker to the wanted area.
5) Rub the sticker from one side to the other, removing any air bubbles.
6) Use an object like a card to make sure the entire sticker is fully attached to the surface.
7) Slowly remove the transfer tape.
In car cameras are one of the best ways to protect your vehicle from vandalism, accidents, or break-ins. If you do not have a budget to buy the camera - buy our Vehicle Window Security Warning Decal Sticker. The result would be the same!!!
Self adhesive. Will not harm your paint or natural finish. Can be applied and reapplied for desired look. Water proof and stain resistant Indoor life of over 8 years. Outdoor life of over 5 years UV protected. Can also be used with a heat gun or household blow drier for shaping. Very flexible and stretchable. Super thin (0.2mm) to fit in most tight spots or corners. Can be used for other projects other than automotive. Super easy to use.
Instructions:
1) Rub the sticker to be sure the transfer tape is properly attached to the sticker.
2) Clean and dry the chosen area.
3) Remove the wax backing slowly making sure the sticker stays attached to the transparent transfer tape.
4) Carefully place the sticker to the wanted area.
5) Rub the sticker from one side to the other, removing any air bubbles.
6) Use an object like a card to make sure the entire sticker is fully attached to the surface.
7) Slowly remove the transfer tape.
